Fluke Scopemeter 190-102: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Fluke ScopeMeter 190-102 Information

the information about the Fluke ScopeMeter 190-102:

Introduction

The Fluke ScopeMeter 190-102 is a portable, two-channel oscilloscope that is safety rated to CAT III 1000V/CAT IV 600V. It features a 100MHz bandwidth, real-time sampling rates up to 1.25 GS/s, and 200 ps resolution. The ScopeMeter 190-102 also has a deep memory of up to 10,000 samples per channel, so you can examine very small parts of the waveform in detail. It is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.

Image of Fluke ScopeMeter 190-102

Specifications

  • Bandwidth: 100 MHz
  • Real-time sampling rate: up to 1.25 GS/s
  • Resolution: 200 ps
  • Memory: up to 10,000 samples per channel
  • Dimensions: 7.2 x 3.9 x 1.6 inches
  • Weight: 1.8 pounds
  • Safety rating: CAT III 1000V/CAT IV 600V
  • IP rating: IP-51

Features

  • Two-channel oscilloscope
  • 100MHz bandwidth
  • Real-time sampling rates up to 1.25 GS/s
  • 200 ps resolution
  • Deep memory of up to 10,000 samples per channel
  • IP-51 rated to withstand dust, drips, humidity, and wide temperature variations
  • CAT III 1000V/CAT IV 600V safety rating
  • Built-in multimeter
  • Logic analyzer
  • Data recorder
  • USB connectivity
  • Wi-Fi connectivity
  • Fluke Connect compatibility

What's in the box

  • Fluke ScopeMeter 190-102
  • Carrying case
  • AC power adapter
  • USB cable
  • BNC to banana adapter
  • Test leads
  • Instruction manual

The Fluke ScopeMeter 190-102 is a powerful and versatile oscilloscope that is ideal for a wide range of applications, including:

  • Electrical troubleshooting
  • Power quality analysis
  • Industrial automation
  • Telecom testing
  • Medical equipment testing
  • Automotive testing
  • Educational use

If you are looking for a portable, rugged, and high-performance oscilloscope, the Fluke ScopeMeter 190-102 is a great option.

Fluke ScopeMeter 190-102 Compare with Similar Item

a table comparing the Fluke ScopeMeter 190-102 with similar items:

FeatureFluke ScopeMeter 190-102Tektronix THS3000
Display3.5" color TFT display3.5" color TFT display
Channels4 analog channels4 analog channels
Sample rate100 kHz100 kHz
Memory depth30,000 data points per channel30,000 data points per channel
Waveform recordingUp to 48 hoursUp to 48 hours
Trend recordingUp to 22 daysN/A
TriggeringAuto, normal, single, pulse, runt, runt-and-glitch, videoAuto, normal, single, pulse, runt, runt-and-glitch, video
Other featuresConnect-and-View triggering, ScopeRecord™, TrendPlot™N/A
Price$1,199$1,299

As you can see, the Fluke ScopeMeter 190-102 and the Tektronix THS3000 are very similar devices. They both have 4 analog channels, a 3.5" color TFT display, a sample rate of 100 kHz, and a memory depth of 30,000 data points per channel. They also both support waveform recording and trend recording. The main difference between the two devices is the price. The Fluke ScopeMeter 190-102 is slightly less expensive than the Tektronix THS3000.

If you are looking for a high-quality handheld oscilloscope with a variety of features at a reasonable price, then the Fluke ScopeMeter 190-102 is a great option. If you are willing to pay a little more, the Tektronix THS3000 offers a few additional features, such as a built-in multimeter and a larger display.

Ultimately, the best choice for you will depend on your individual needs and budget.

Fluke ScopeMeter 190-102 Pros/Cons and My Thought

The Fluke ScopeMeter 190-102 is a two-channel oscilloscope with a maximum bandwidth of 100 MHz. It also includes a multimeter function, making it a versatile tool for electrical troubleshooting.

Pros:

  • The ScopeMeter 190-102 is well-built and rugged. It is rated for CAT III 1000 V and CAT IV 600 V safety, making it safe to use in high-voltage environments.
  • The oscilloscope has a clear and bright display. The screen is large enough to view waveforms comfortably, even in bright sunlight.
  • The ScopeMeter 190-102 has a wide range of features, including:
    • Two analog channels
    • 100 MHz bandwidth
    • 1000:1 probe attenuation
    • 8 digital channels
    • 10 kHz to 10 MHz bandwidth
    • 2000 readings per channel
    • USB connectivity for data logging and analysis
  • The multimeter function is accurate and reliable. It can measure AC/DC voltage, current, resistance, capacitance, and frequency.

Cons:

  • The ScopeMeter 190-102 is not the most affordable oscilloscope on the market.
  • The display does not have a wide viewing angle. This can make it difficult to see waveforms if you are not looking directly at the screen.
  • The software that comes with the ScopeMeter 190-102 is not as user-friendly as some other oscilloscope software programs.

User reviews:

  • Positive: "This is a great oscilloscope for the price. It is well-built and has a wide range of features. The display is clear and bright, and the multimeter function is accurate and reliable."
  • Negative: "The display does not have a wide viewing angle. This can make it difficult to see waveforms if you are not looking directly at the screen."
  • My thoughts: The Fluke ScopeMeter 190-102 is a good oscilloscope for the price. It is well-built, has a wide range of features, and is accurate and reliable. However, the display does not have a wide viewing angle, and the software that comes with it is not as user-friendly as some other oscilloscope software programs. Overall, I would recommend this oscilloscope to anyone who is looking for a reliable and affordable tool for electrical troubleshooting.

Here are some other oscilloscopes that you may want to consider:

  • Tektronix TBS1000: This oscilloscope has a similar feature set to the Fluke ScopeMeter 190-102, but it is slightly more expensive.
  • Siglent SDS1202X-E: This oscilloscope is less expensive than the Fluke ScopeMeter 190-102, but it has a lower bandwidth and fewer features.
  • Picoscope 5000T: This oscilloscope is more expensive than the Fluke ScopeMeter 190-102, but it has a higher bandwidth and more features.

Fluke ScopeMeter 190-102 Where To Buy

Sure. You can buy the Fluke ScopeMeter 190-102 and spare parts from the following retailers:

  • Fluke direct: This is the official website of Fluke, the manufacturer of the ScopeMeter 190-102. You can buy the meter and spare parts here at the best prices. Image of Fluke ScopeMeter 190-102 on Fluke direct website
  • Walmart: Walmart is a large retailer that sells a wide variety of products, including the Fluke ScopeMeter 190-102. You can find it here at a competitive price. Image of Fluke ScopeMeter 190-102 on Walmart website
  • Amazon: Amazon is another large retailer that sells the Fluke ScopeMeter 190-102. You can find it here at a variety of prices, depending on the seller. Image of Fluke ScopeMeter 190-102 on Amazon website
  • Best Buy: Best Buy is a retailer that specializes in electronics. You can find the Fluke ScopeMeter 190-102 here at a competitive price. Image of Fluke ScopeMeter 190-102 on Best Buy website
  • Lowes: Lowe's is a home improvement retailer that sells a variety of tools and equipment, including the Fluke ScopeMeter 190-102. You can find it here at a competitive price.
  • eBay: eBay is an online auction site where you can find a variety of products, including the Fluke ScopeMeter 190-102. You can often find good deals on used meters here. Image of Fluke ScopeMeter 190-102 on eBay website

I hope this helps!

Fluke ScopeMeter 190-102 Problems and Solutions

Here are some common issues and solutions for the Fluke ScopeMeter 190-102, as reported by experts:

  • The scopemeter may not turn on.
    • Check the power cord and make sure it is plugged in.
    • Check the fuse and replace it if necessary.
  • The scopemeter may not display any data.
    • Make sure the probe is properly connected to the scopemeter.
    • Check the input settings on the scopemeter.
    • Make sure the signal is within the bandwidth of the scopemeter.
    • Increase the gain on the scopemeter.
  • The scopemeter may not be able to capture a signal.
    • Make sure the signal is within the bandwidth of the scopemeter.
    • Increase the gain on the scopemeter.
    • Use a different probe.
  • The scopemeter may not be displaying the correct data.
    • Check the input settings on the scopemeter.
    • Make sure the probe is properly calibrated.
    • Use a different probe.

If you are still having problems with your Fluke ScopeMeter 190-102, you can contact Fluke customer support for further assistance.

Here are some additional tips for troubleshooting common Fluke ScopeMeter 190-102 issues:

  • If the scopemeter is not turning on, try a different power outlet.
  • If the scopemeter is not displaying any data, try connecting a different probe.
  • If the scopemeter is not capturing a signal, try increasing the gain.
  • If the scopemeter is not displaying the correct data, try calibrating the probe.

If you have followed these troubleshooting tips and are still having problems with your Fluke ScopeMeter 190-102, you should contact Fluke customer support for further assistance.

Fluke ScopeMeter 190-102 Manual

Fluke ScopeMeter 190-102 Manual

Safety Information

  • This instrument is double-insulated and safety rated for CAT III 1000 V/CAT IV 600 V environments.
  • Do not work alone.
  • Always follow local and national safety regulations.
  • Use personal protective equipment (PPE), such as rubber gloves, safety glasses, and flame-resistant clothing, when working with electrical circuits.
  • Do not open the instrument housing.
  • Disconnect the power before cleaning the instrument.
  • Use only the specified replacement parts.

Before Use

  • Read the safety information in this manual before using the instrument.
  • Familiarize yourself with the controls and functions of the instrument.
  • Use the correct probes for the measurements you are making.
  • Set the appropriate voltage and current ranges before making measurements.
  • Do not exceed the maximum rated voltage or current for the instrument.

Troubleshooting

  • If the instrument is not working properly, check the following:
    • Are the batteries installed correctly?
    • Are the probes connected properly?
    • Are the correct voltage and current ranges selected?
    • Is the instrument overloaded?
  • If you cannot troubleshoot the problem, contact Fluke Technical Support.

Maintenance

  • Keep the instrument clean and free of dust and dirt.
  • Wipe the instrument with a soft, damp cloth.
  • Do not use harsh chemicals or solvents to clean the instrument.
  • Store the instrument in a cool, dry place.

Warranty

The Fluke ScopeMeter 190-102 is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the instrument fails during the warranty period, Fluke will repair or replace it, at its option, free of charge.

Contact Information

Additional Information

  • The Fluke ScopeMeter 190-102 is a portable oscilloscope with two channels and a bandwidth of 500 MHz.
  • It is safety rated for CAT III 1000 V/CAT IV 600 V environments.
  • It has a deep memory of up to 10,000 samples per channel.
  • It is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.
  • It is powered by two AA batteries or an optional AC adapter.
  • It comes with a variety of probes and accessories.
  • For more information, please visit the Fluke website or contact Fluke Technical Support.

Comments

Post a Comment

Popular posts from this blog

Hitachi Ch 22ebp: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Hitachi CH 22EBP Information The Hitachi CH 22EBP is a powerful and versatile hedge trimmer that is perfect for both commercial and residential use. It features a 0.66 kW engine that delivers plenty of power for even the toughest jobs, and its 500mm long blades can easily cut through thick branches and shrubbery. The trimmer is also equipped with a number of features that make it easy to use and maintain, including a S-start system for easy starting, a QuickTwist handle that can be adjusted to five different positions, and a primer pump for cold-weather starting. Image of Hitachi CH 22EBP hedge trimmer Specifications
Read more

Tfa Beam 31.1132: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

TFA Beam 31.1132 Information The TFA Beam 31.1132 is a contactless infrared thermometer that is used to measure the surface temperature of objects. It has a laser pointer that helps to accurately target the area to be measured, and it can measure temperatures from -10°C to 1000°C. The TFA Beam 31.1132 is also compliant with HACCP standards, making it ideal for use in foodservice applications. Introduction The TFA Beam 31.1132 is a versatile and accurate infrared thermometer that can be used for a variety of applications. It is ideal for use in foodservice, manufacturing, and construction industries. The TFA Beam 31.1132 is also a great tool for homeowners who want to check the temperature of their appliances, HVAC systems, and other objects.
Read more

The Complete Guide To Voltcraft Ms-410: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Voltcraft MS-410 Information The Voltcraft MS-410 is a magnetic field tester that is used to detect the presence of a magnetic field in magnet valves, coils, solenoids, and electrical relays. It is a non-contact device, so there is no need to touch the component being tested. The sensor is simply held close to the component, and a bright red LED will indicate if a magnetic field is present. The MS-410 has a robust casing made of spray-on soft plastic, and it comes with a shirt-clip for easy portability. It also features a built-in LED flashlight, which is useful for working in dark or poorly lit areas. Here is a table of the full specifications of the Voltcraft MS-410:
Read more